# gln configuration file # # lines starting with # (like this one) are comments # lines starting with F0 or FR define global parameters # lines starting with F1 define the detector slot parameters # lines starting with F2 define the detector parameters # lines starting with F3 define the detector RTD/temp parameters # lines starting with F4 define the manifold parameters # # # RELAYS (ids 0-39 or use aliases below) # powerswitch 1 (tank): c1.1-c1.8 # powerswitch 2 (clarion a): c2.1-c2.8 # powerswitch 3 (clarion a): c3.1-c3.8 # powerswitch 4 (clarion b): c4.1-c4.8 # powerswitch 5 (clarion b): c5.1-c5.8 # # # ADCS (ids 0-63 or use aliases below) # eagle daq ADCS: c0.1-c63.1 # # ADC Panel conditioning circuit calibration = 0.6552 -10.98 # # global parameters #F0 master_valve_num pres_adc pres_min pres_max F0 c1.6 c63.1 -300 330 # pressures in psi #FR min_range max_range (values outside this range means adc not connected?) FR 20 2450 # for temperature adcs #FV post-fill vent duration, in minutes (set to zero for no vent) FV 2 # disabled; usual enabled value = 10 # # # # # slot parameters # valve_num is valve id for filling detector in this slot # olfo_adc is adc id for overflow sensor for filling detector in this slot # olfo_lim is adc value for liquid at overflow sensor #F1 slot_num man_num valve_num oflo_adc olflo_lim adc2K adc_offset # #clarion A slots and manifolds (1 physical and 2 virtual) F1 1 1 c2.1 c31.1 153 0.6552 -10.98 F1 2 1 c2.2 c32.1 153 0.6552 -10.98 F1 3 1 c2.3 c33.1 153 0.6552 -10.98 F1 4 1 c2.4 c34.1 153 0.6552 -10.98 F1 5 1 c2.5 c35.1 153 0.6552 -10.98 F1 6 1 c2.6 c36.1 153 0.6552 -10.98 F1 7 2 c2.7 c37.1 153 0.6552 -10.98 F1 8 2 c2.8 c38.1 153 0.6552 -10.98 F1 9 2 c3.1 c39.1 153 0.6552 -10.98 F1 10 2 c3.2 c40.1 153 0.6552 -10.98 F1 11 2 c3.3 c41.1 153 0.6552 -10.98 F1 12 2 c3.4 c42.1 153 0.6552 -10.98 F1 13 2 c3.5 c43.1 153 0.6552 -10.98 #clarion B ports and manifolds (1 physical and 2 virtual) #F1 14 3 c4.1 c44.1 146 0.6552 -10.98 #F1 15 3 c4.2 c45.1 146 0.6552 -10.98 #F1 16 3 c4.3 c46.1 146 0.6552 -10.98 #F1 17 3 c4.5 c47.1 146 0.6552 -10.98 #F1 18 3 c4.6 c48.1 146 0.6552 -10.98 #F1 19 4 c4.7 c49.1 146 0.6552 -10.98 #F1 20 4 c4.8 c50.1 146 0.6552 -10.98 #F1 21 4 c5.1 c51.1 146 0.6552 -10.98 #F1 22 4 c5.2 c52.1 146 0.6552 -10.98 #F1 23 4 c5.3 c53.1 146 0.6552 -10.98 #F1 24 4 c5.4 c54.1 146 0.6552 -10.98 #tank fill F1 0 0 c1.1 c30.1 150 0.6552 -10.98 # # # # # detector parameters # slot_num is the slot where this detector is mounted, or -1 for not mounted # min_dur, max_dur are for duration in seconds # interval is fill interval in hours #F2 det_num slot_num min_dur max_dur interval #Clarion A F2 1 1 60 360 6.0 F2 2 2 60 360 6.0 F2 3 3 60 360 6.0 F2 4 4 60 360 6.0 F2 5 5 60 360 6.0 F2 6 6 60 360 6.0 F2 7 7 60 360 6.0 F2 8 8 60 360 6.0 F2 9 9 60 360 6.0 F2 10 10 60 360 6.0 F2 11 11 60 360 6.0 F2 12 12 60 360 6.0 F2 13 13 60 360 6.0 #Clarion B #F2 14 14 60 280 8.0 #F2 15 15 60 280 8.0 #F2 16 16 60 280 8.0 #F2 17 17 60 280 8.0 #F2 18 18 60 280 8.0 #F2 19 19 60 280 8.0 #F2 20 20 60 280 8.0 #F2 21 21 60 280 8.0 #F2 22 22 60 280 8.0 #F2 23 23 60 280 8.0 #F2 24 24 60 280 8.0 # # TANK + ROOM TEMP F2 0 0 60 3600 24.0 # # detector RTD (temp) parameters # temp_adc is the adc id for the internal temperature of this detecor # max_temp is the max detector temp for a happy system, with no alarm # max_HV is the max detector temp for HV allowed on crystal # adc2K, adc_offset are adc-to-temp conversion parameters #F3 det_num temp_adc max_temp max_HV adc2K adc_offset # #Clarion A F3 1 c1.1 105 125 0.6552 -10.98 F3 2 c2.1 109 125 0.6552 -10.98 F3 3 c3.1 111 125 0.6552 -10.98 F3 4 c4.1 124 125 0.6552 -10.98 F3 5 c5.1 108 125 0.6552 -10.98 F3 6 c6.1 108 125 0.6552 -10.98 F3 7 c7.1 112 125 0.6552 -10.98 F3 8 c8.1 124 125 0.6552 -10.98 F3 9 c9.1 106 125 0.6552 -10.98 F3 10 c10.1 112 125 0.6552 -10.98 F3 11 c11.1 114 125 0.6552 -10.98 F3 12 c12.1 118 125 0.6552 -10.98 F3 13 c13.1 118 125 0.6552 -10.98 #Clarion B #F3 14 c14.1 120 125 0.6552 -10.98 #F3 15 c15.1 120 125 0.6552 -10.98 #F3 16 c16.1 120 125 0.6552 -10.98 #F3 17 c17.1 120 125 0.6552 -10.98 #F3 18 c18.1 120 125 0.6552 -10.98 #F3 19 c19.1 120 125 0.6552 -10.98 #F3 20 c20.1 120 125 0.6552 -10.98 #F3 21 c21.1 120 125 0.6552 -10.98 #F3 22 c22.1 120 125 0.6552 -10.98 #F3 23 c23.1 120 125 0.6552 -10.98 #F3 24 c24.1 120 125 0.6552 -10.98 # ROOM TEMP F3 0 c51.1 306 306 0.6552 -10.98 # # manifold parameters # valve_num is valve id for precooling this manifold # olfo_adc is adc id for overflow sensor for precooling this manifold # olfo_lim is adc value for liquid at overflow sensor # min_dur, max_dur are for duration in seconds # #F4 man_num valve_num oflo_adc olflo_lim max_dur adc2K adc_offset #Tank F4 0 c1.1 c30.1 450 10 0.6552 -10.98 #Clarion A F4 1 c3.8 c60.1 170 900 0.6552 -10.98 F4 2 c3.8 c60.1 170 900 0.6552 -10.98 #Clarion B #F4 3 c5.8 c61.1 170 360 0.6552 -10.98 #F4 4 c5.8 c61.1 170 360 0.6552 -10.98 #